As of Friday 3rd February, a new GB3RD was put on air. It uses a similar type of base station but has new logic. The Repeater is now CTCSS only access so you will need to set an encode tone of 118.8Hz on your transceiver. The ident. is now by voice and occurs every 15 minutes.

The repeater is located on a farm and there are many potential sources of interference. To minimise these we have had a 3dB attenuator located in the antenna feeder. This has now been removed so the repeater should be 3dB (which isn’t much) stronger and also receive should benefit by the same amount. The implementation of full CTCSS should minimise potential interference.

Chris,

G4CCC. o/b/o Thames Valley Repeater Group.